I Reset Nighthawk Router but Can’t Reconfigure it. Help!

“I reset Nighthawk router because I was having issues logging in to it. But, after resetting router, when I tried to configure it again, I realize that I failed to perform the router setup process again. Please help – as I reset the router but can’t reconfigure it.” – A Nighthawk router user!

Are you also having issues setting up your Netgear Nighthawk router again after resetting? If your answer is yes, then this article can help. In this piece of writing, you will get to know how to configure the router from the comfort of your home. Keep reading!

How to Reconfigure Router after Resetting [Fixed]

The fixes that will help you set up the Nighthawk router again after resetting are as follows:

Plug in Your Nighthawk Router Properly

First things first, you need to plug in your WiFi router to a working power outlet and turn it on. Upon turning on the WiFi router, the power LED on it will start blinking green. As soon as the LED gets stable, head over to the next step.

Make sure the wall socket is providing stable electricity to the router. If it is not or the wall socket is damaged, then we suggest you choose a different wall plug for your router to plug it in.

Connect Your Nighthawk Router and Internet Modem

The next step that will help you perform the Nighthawk router setup in a hassle-free after resetting is to make a connection between your internet router and it (the router).

If your Nighthawk router and internet modem both have theWPS feature, then you can connect them wirelessly. Here’s how to do so:

• First, press the WPS button on your internet modem and wait for 2 minutes.
• Now, press the WPS button on your Nighthawk router.

Thus, in this way – you can connect the devices wirelessly.

But, your Nighthawk router and internet modem or any one of the device doesn’t have the WPS button, you can use wired source for connecting them. Here’s how to connect the devices using wired source:

• Place your router and internet modem at a safe distance.
• After that, put your hands on the Ethernet cable.
• Connect one end of the cable in your Nighthawk router and other end in your internet modem.

Now, try performing Nighthawk router setup process again to see if you rack up success this time.

Check Your Internet Connection

Bear in mind – if your internet connection is poor, then also you will have issues performing the Nighthawk router setup process after resetting. The best way to deal with the issue is to call your ISP and ask him to fix the poor/ wonky internet issue for you so that you can perform Nighthawk router setup process with ease.

Follow Correct Nighthawk Router Setup

Still getting the same issue? If yes, then it seems like you are not following the router setup instructions in the correct manner. So, to get success with the router setup process, we suggest you apply the instructions to set up the router in the exact given they are provided. And, for easy and complete router setup steps, you may refer to the highlighted link above.

While configuring the router, make sure to connect your computer/ laptop to it either wirelessly or using an Ethernet cable.

The Last Words

In this way, you can troubleshoot can’t perform Nighthawk router setup process after resetting it. We really hope that the hacks listed above were helpful. Hold on! There is one more important tip that we would like to share prior to ending up this article i.e. to perform the Nighthawk router firmware update process on regular basis. Firmware updates ensure the best performance of the device whenever you update it.