Netgear Orbi is a mesh WiFi system. It extends the network equally throughout the house. To your knowledge, the Orbi mesh network works well when the router is connected to the host modem with an Ethernet cable to get an internet connection. After that, Orbi satellites are synced with the Orbi router. All of the Orbi WiFi extender setup is done using the login URL orbilogin.net or the Orbi app.
But, nowadays, some users report about Orbi satellite not connecting to the router issue. If you are also facing the same issue and wondering to know the reasons to fix it, then you have come to the right place. Here, we are going to tell you some basic troubleshooting tips that will assist you. So, we recommend you read the post without further ado!
Why is Orbi Satellite Not Connected?
Well, there are many possible reasons behind this, maybe your device becomes the victim of technical glitches, a loose connection of Ethernet cable, a weak internet connection, and many more. But, you can solve this issue with a simple reboot process. Because it is seen that most of the people resolve the Orbi-related issues by restarting the device. So, you should also try this first, maybe you are in luck and able to connect the satellites.
However, in case you are not able to connect to the Orbi satellite after the reboot process, then you don’t need to worry. After all, we gave an effective and strong solution for you in further article. So, let’s start!
Fix: Orbi Satellite Not Connecting
Here, in this section, you are going through the most effective troubleshooting tips that always work.
Press the SYNC Button
We start with this because most of the time users can’t sync the Orbi satellite with the Orbi router because some users are not aware of it or some forget to press the sync button. So, there is the possibility that the same thing happened to you. Thus, to confirm it, you need to check the sync button on your satellite as well as whether the Orbi router is pressed or not. If it isn’t pressed then you need to press it and sync the satellites.
Remove the Orbi Devices Distance
Now, the second thing you need to do is check the distance between the Orbi satellites and the router. Sometimes due to long-distance the Orbi devices are not connected properly. So, if you found an excessive distance between the devices then cut off the distance and place the satellite near the router at a half distance so that the satellite is properly connected with the router.
Update the Orbi Firmware
Although, the firmware of the Orbi system is updated automatically but due to some reasons auto firmware is interrupted sometime. So, it very important for you to keep the device update because the old version and corrupted firmware put the device at higher risk. So, there is a chance that your Orbi system is running into its old firmware. To confirm, you need to access orbilogin.com. In case you found the old version of firmware then you should update it at a time.
Tip: If you are using the Orbi application, then you can also take its help to update the firmware.
Reset Orbi
If you are still in the same situation then it is high time to set the Netgear Orbi to its factory settings. To do this you need to press the reset button on the Orbi and wait for some time until the device is reset.
Conclusion
This was all about the effective solutions to solve the Orbi satellite not connecting issue. Hope the above mentioned hacks will assist you and that you will be able to connect your Orbi satellite properly.