Setek Extender Not Connecting to AP? Let’s Fix This!
You will surely get no WiFi to access on your connected devices if you are unable to create a connection between your Setek WiFi extender and access point (AP). Need not to worry! We are here to help you. In this piece of writing, you will get relevant fixes for Setek WiFi extender not connecting to AP (access point) trouble in blink of an eye. Let’s get the ball rolling!
Setek Extender Not Connecting to AP [Reasons]
The reasons behind causing the trouble in discussion are outlined underneath:
Distance between your Setek WiFi extender and AP is too much
You have used a damaged Ethernet cable for (in case of wired location)
Technical glitches are now allowing you connect your Setek WiFi extender to AP
These are the topmost reasons creating Setek WiFi extender not connecting to AP problem. Now, let’s dig a little deeper and know how to do away with the problem in a jiffy. Continue reading!
Setek Extender Not Connecting to AP [Fixes]
The fixes to troubleshoot Setek WiFi extender not connecting to AP are highlighted below. We want you go through them (the fixes) first. Why? Because we don’t you fail resolving the issue via using these fixes. So, let’s dig a little deeper and know the fixes to troubleshoot the issue.
Restart Your Setek WiFi Extender
You must restart your Setek WiFi extender in order to get rid of technical glitches in manner of minutes. The reason being, because of technical issues you may get issues while connecting your WiFi extender to AP. To restart your Setek extender what you have to do, unplug it from its respective power outlet, wait for 25-30 minutes, and then plug it back in again.
Make sure that the power outlet you have used for plugging in your Setek extender is not damaged and providing continuous power supply to it (the extender).
Now, try connecting your Setek extender to AP again. We hope that the restarting process proved helpful.
Lessen the Setek Extender and Router Distance
On the off chance, restarting process doesn’t help you connect your Setek WiFi extender to AP, then it’s high time that you lessen the distance between them. Ensure that your extender and the AP are not placed at an excessive distance. Bear in mind, too much distance between them will not let them communicate with each other without hindrance. So, ensure to place them at a safe distance. Means? Your Setek WiFi extender and AP neither should be placed too close or too far from the range of each other. You can place them close only when you want to connect them using a wired source.
Check the Ethernet Cable
If you have connected your Setek WiFi extender and AP using an Ethernet cable, then you must ensure that it (the cable) is well working and doesn’t have cuts on damages on it. In the event, you find even a single cut or other damages on the cable, we suggest you avoid using it.
After having a good quality Ethernet cable, try connecting your Setek WiFi extender to AP again. We hope that replacing the cable will help you connecting your AP and router.
Change the Setek Extender and AP Location
If you want to connect Setek extender to router using a wireless source, then you must see that they are placed at the correct location and no interference-creating WiFi devices are placed near to them. Interference-creating devices are baby monitors, Bluetooth speakers, and Alexa devices. Moreover, you must avoid placing them (extender and AP) near to refrigerator, Microwave, etc. as they may have the same frequencies of your extender and AP.
Then, where to place them?
Your Setek superboost WiFi extender and AP should be placed in the same room. And, if you don’t have wall sockets for them for placing them closer, then you may use an extension cord.
The Last Words
Setek WiFi extender is one of the outstanding networking devices, when connected with AP, will provide you blazing-fast internet range without signal drop even from those areas of your home where you have never found the WiFi before.
Now, we are about to end our post on how to resolve Setek WiFi extender not connecting to AP problem. Anticipating that you will be able to connect your devices in a hassle-free manner using the hacks mentioned above.