Step by Step Guide Chiller Repair Servics in Dubai
If you don’t have the right knowledge, commercial chiller repairs can be time-consuming and expensive. This guide will teach you how to diagnose and repair your industrial chilled, so it can work at its full capacity once again.
Tips on Commercial Chiller Repair & Maintenance
Repairing commercial chillers is a vital part of the job for any chiller owner. Industrial chiller failures can have many causes, but some simple steps will help prevent them.
- Routine maintenance should be performed every three months. You should be provided with a chiller check form by your chiller manufacturer. You should consider joining a preventative maintenance program if it is available. Use a licensed HVAC contractor to perform all maintenance and repair work. Keep records to refer to in the future.
- Heat transfer fluid should be inspected to make sure it is clean and rated appropriately for ambient temperatures and the process fluid temperature. Next, check the “Y strainer” to ensure it is clean and free of any debris that could restrict the flow.
- Check the condenser coils next for dirt and debris. Clean coils will promote better heat transfer by allowing for more airflow. Condenser and Evaporator Pressures.
- Check the wiring and connections. Make sure they are secure and tight. Over time, loose wires may cause random chiller faults.
- Check that chiller switches work properly. This will ensure that the chiller is protected in case of a malfunction. Check the fan blades, shafts, bearings, and motors for signs of wear. This will ensure that the chiller is able to achieve the proper airflow to remove heat. Listen for any unusual sounds or vibrations.
- Electrical contacts must be cleaned and inspected thoroughly. Check the pump seals and bearings to ensure they are not leaking. Also, check the piping for any fluid leaks.
- Last, make sure the Schrader valve has been seated properly and that the cap is securely fastened.
Chiller Parts, Tools & Accessories
It is essential that you know the parts needed to repair your water chiller and what tools are necessary to avoid malfunctions. You should also know how long it will take you to complete each task. These tools are essential for commercial chiller owners.
- Refractometer- Check the glycol concentration to ensure it offers adequate protection against freezing.
- Ohmmeter Measure the ohm rating of the fan motor, compressor, and chiller pump using an ohmmeter.
- Voltmeter- Record voltages to make sure they are within 10% of the stated voltage rating.
- Hand Tool Use a variety of hand tools to replace or tighten components and structures of the chiller.
Cold Shot Chillers has a large inventory of both new and used chiller systems, as well as a wide range of parts and accessories. We offer a wide range of high-quality, reliable replacement structural components.
Chiller Wear Parts
Wear parts are those parts of the chiller which show the most wear. They need to be changed periodically. Wear parts include:
- Motor starter
- Bearings
- Pump seals
- Thermal Couples
- Flow switch
- Fuses
- Solenoid valves
- Thermal expansion valve
- Temperature control
- Switches
Uaetechnician Chillers recommends keeping a minimal amount of spares on hand to avoid unnecessarily long downtimes.
Get Best Chiller Repair Company in Dubai near me
If you’re trying to find one of the best companies to fix your AC chiller Repair in Dubai. From air conditioning installation to repair and maintenance, UAEtechnician offers a comprehensive range of services. The group of technicians handles their work with professionalism. Call us at 045864033.