I recently bought a Netgear Orbi router in my home and configured it to make the most out of my internet connection. Though I rack up Orbi login and setup success, but despite the fact, I find that my device has stopped working suddenly. Please help me with this!”
We are continuously receiving these queries from our Orbi router users worldwide. Considering you are on this page, it’s crystal-clear that you also have the same concern, right? If so, then need not to worry about anything. The reason is, in this particular piece of writing, we have provided a number of tested and proven troubleshooting hacks following which the issue Orbi router not working issue can be fixed at hand. Hence, stick to this 3-minute read!
Note: Do not panic if you don’t have Netgear RBR50 Orbi. The troubleshooting hacks can be implemented on any Orbi model. So, the fact of the matter is, you have some of the best hacks handy that can make your Orbi work smoothly.
Fixed: Netgear RBR50 Orbi Not Working
Fix 1: Check the Power Supply
The first and foremost reason that has caused the issue is the improper power supply to the Orbi router. Therefore, to make your Orbi device up and running, it is recommended that you verify the power (electricity) being supplied to your device. Ensure that it is steady and fluctuation-free.
Besides, you need to check the Orbi router’s wall outlet as well. Bear in mind, use of a damaged wall socket will make it difficult for the power to reach the wires of the power adapter of the extender. To make your extender well-working for you without giving you any issues, plug in your Orbi to a working power outlet.
Fix 2: Check the Connection
Another common reason why you are experiencing the issue in discussion is because you have not connected your devices (extender and router) in a proper way. To troubleshoot the issue, it is suggested that you connect them firmly.
There are a couple of important points that you must keep in mind prior to connecting your devices.
Ethernet source: On the off chance, you have used an Ethernet cable for making a connection between your devices, ensure that:
One: The cable is in working condition. Means, the cable must not have any damages or cuts on it.
Two: The cable supposed to be connected into the correct ports of your Orbi and the satellite.
Three: Ethernet connection between them (your devices) must be finger-tight.
Four: Use an extension cord or two working wall plugs to plug in Orbi and satellite closer to each other.
Wireless Source: If you have used a wireless source, then ensure to place your Orbi and satellite in close proximity and ensure that their WiFi signals aren’t getting interrupted by your neighbouring networks. After their correct placement, press the sync button on your Orbi and within 2 minutes, press the sync button on the satellite.
Fix 3: Do Orbi Firmware Update
In case, you are still experiencing the same issue, then it might be because of an outdated Orbi firmware. To do away with the problem, consider updating the firmware of your Orbi device right away.
Fix 4: Restart Nextbox Extender
None of the tested and proven hacks listed above resolve the issue for you? Well, it seems like your Orbi is prone to technical glitches. Taking this into consideration, we suggest you restart your Netgear RBR50 Orbi right now. Simply unplug it, wait for some time, and plug it back in again. But, prior to applying this step, don’t forget to disconnect it from your router.
In the event that restarting of Netgear RBR50 Orbi doesn’t help you out, then it seems like your device isn’t configured in a correct manner. So, to get the Orbi setup process correctly – you must consider these tips and get to know the Netgear Orbi setup tips that you shouldn’t miss.